Sonoptix ECHO Software Updates

Updating the sonar is very easy.  Download the .ZIP file below and extract the .SWU software file.  Then add ':8081" to the IP address your sonar is set to and you will see a user interface appear with a drag-n-drop box.   Drag-n-drop the .SWU file into the box and allow the installation to be completed.  Once completed, reboot the sonar and you will have an updated sonar.

1.5.1 (2024-10-21)

• Apply static gain and contrast values on RTSP data

1.5.0 (2024-5-23)

• Pitch and roll values on video

1.4.0 (2024-4-6)

• Water Column raw data stream via RTSP (rtsp://{sonar_ip}:8554/raw)

• Manual selector for operation mode (AUTO, High Frequency, Low Frequency, Low Frequency Long Range)

• Upload custom logo (top left corner of the video)

1.2.0 (2024-02-01)

• UI measurement tool (distance between two points on sonar image)

• External trigger (rising/falling edge)

• Maximum range 200 m

1.1.0 (2023-11-21)

• UI assignable hotkeys

• UI sonar image snapshot

• UI button to access software update page

• UI select video fomat, mp4 or webm

• UI can set device hostname

• UI factory reset button

• minimum range 0.2 m